Sunburst Embroidered Notebook

Sunburst Embroidered Notebook

Take a plain old notebook, some embroidery thread and with some simple stitches create a unique design!

I had seen a lot of sunburst style mirrors around (like this one from The Forest & Co) and I really love the shape, but wanted to use it for something a bit different. Now I’m also obsessed with notebooks. I have sketchbooks, ones for business planning, for recording how I make my jewellery and ones for blog post ideas. I can never get enough. We hadn’t had any stitchy tutorials for a while so we ended up with a sunburst embroidered notebook! Read more

Tell your friends!

Statement Summer Necklace DIY

Get ready for summer with this beaded necklace, using colourful wood and thread.summer statement necklace DIY

We have been having some very lovely early spring weather here in the UK, which has made me want to make some bright, summery jewellery! I came across these turquoise colour wooden beads and knew I had to have them! And paired with this coral thread, it just screams summer! Read more

Tell your friends!

Tutorial – Beaded Diamond Bracelet

beaded diamond bracelet diy tutorial

This sweet and simple beaded bracelet use just a few seed beads and some thread and is finished with a sliding knot.

You will need:
-1.5m of S-Lon Thread
-16x Size 6 or 7 seed beads
-Scissors
-Ruler
-Superglue
-Tape

beaded diamond bracelet diy tutorial



How to:
1. Cut two 50cm lengths of S-Lon and knot them together, approx 15cm from one end.

beaded diamond bracelet diy tutorial

2. Stick the shorter ends down to your work surface with some tape. Cut the longer ends at an angle, to make threading the beads onto the thread easier.

beaded diamond bracelet diy tutorial

3. Take one bead and using the longer ends of thread, take one through the bead left to right and the other right to left.

beaded diamond bracelet diy tutorial

4. Pull the ends tight until the bead sits up near the knot.

beaded diamond bracelet diy tutorial

5. Now with two beads at the same time, take one thread left to right and the other right to left

beaded diamond bracelet diy tutorial

6. Pull tight so these beads sit up against the first

beaded diamond bracelet diy tutorial

7. Repeat the process with three beads and then four beads

beaded diamond bracelet diy tutorial

8. Then go back to three, then two and one. Tie another knot just after the last bead.

beaded diamond bracelet diy tutorial

9. Knot the ends to match the other side. Cross the ends together ready to tie the sliding knot.

beaded diamond bracelet diy tutorial

10. Take another 50cm length of S-Lon and tie a series of square knots around the two main threads. A step by step of how to tie a square sliding knot is available here.

beaded diamond bracelet diy tutorial

11. Trim off any excess thread and finish with a tiny dab of superglue. Seed beads come in so many amazing colours and the S-Lon has a gorgeous selection too, so why not make an wrist-full!

beaded diamond bracelet diy tutorial

If you make your own version of this diamond beaded bracelet or have any questions feel free to comment below or message me on TwitterInstagram or Facebook!! Happy Making!

Tell your friends!

Paper Stitched Heart

Paper Stitched Heart

This updated version of string art uses bakers twine or embroidery thread stitched onto card, makes a wonderful Valentines card or frame-worthy piece of art!

stitched heart-24

As a kid, I remember a piece of string art hanging on the wall in our hallway. In string art, thread is wrapped between pins that have been stuck into a wooden or cork surface. Made by my uncle Charlie, it was a wonderful seventies number, all orange and brown sparkly threads. It always fascinated me, so I’m so glad I have found this type of paper embroidery is so similar, but much easier to display! And less seventies….

You will need:
Template
-Card
-Pin
-Tapestry Needle
-Bakers twine (or Embroidery Floss)
-Washi/Masking/other low tack tape
-Piece of thin foam or felt
-Scissors

Paper Embroidered Heart

How to:
1.Print out this template. If you print out on A4 without altering the scale, it will be just the right size for a A6 card. Trim template down to approx 1cm smaller than the front of your card. Temporarily hold in place with some washi or low tack tape.

Paper Embroidered Heart

3.Place the card onto your foam or felt surface and use the pin to punch a hole through each dot.

Paper Embroidered Heart

3.Thread your needle with 1metre of twine.

Paper Embroidered Heart

4.Leaving the paper template in place (you can rip it off later after all the stitching is finished) stitch from the back of the card to the front at point 1, leaving a 10cm tail. Hold the tail in place on the back of the card with a bit more tape.

Paper Embroidered Heart

5.Insert your needle in at point 2 and come out at point 3.

Paper Embroidered Heart

4.Take the needle in at point 4 and out a point 5. Follow this pattern of counting six points along clockwise to take your needle in and bringing it out another point along, going back in six points and out the next. After a few stitches, the pattern will become easier to see.

Paper Embroidered Heart

5.From point 13  you will be going through holes that already have twine in them (these points are numbered on the outside of the heart), just keep the pattern going.

Paper Embroidered Heart

6.Keep going until your needle goes in point 34 at the bottom of the heart.

Paper Embroidered Heart

7. Turn the card over and weave in the tail. Re-thread the start of the twine and weave this in too. Trim off any excess.

Paper Embroidered Heart

8.With another 1m of thread in your needle repeat the process on the other side of the heart, this time working anti-clockwise. So coming out of point one, counting six points along and taking the needle in, one along and stitching back 6, etc.

Paper Embroidered Heart

9.Weave the ends in as before and rip off the paper template.

stitched paper heart

stiched paper heart

 

Tell your friends!
http://nosubhealth.com